Furnace & heating
AC repair
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Pomona
Furnace repair in Pomona typically runs $150 to $700, and most jobs are completed in a single visit. If your heat won’t kick on during a cold Pomona Valley night, or you smell gas near a floor furnace, call us at (831) 607-5485. We answer live, 24/7, and send a background-checked technician with a written price before any work begins.
We know Pomona homes. We know the 1950s tract houses off Holt Avenue, the slab-on-grade ranches near Ganesha Park, and the older bungalows around Lincoln Park that still run original gravity wall heaters. Our Furnace Repair team works on all of them weekly, and we do not do vague four-hour arrival windows. You book, you get a live arrival time, and you can track your tech to your door.
Why Halden Heating and Air West Covina Is Pomona’s Preferred Furnace Repair Company
Pomona homeowners call us because the furnace problems here are not the same as in newer developments over in Chino Hills. We diagnose the whole system, not just the broken part. That matters in a city with this much mid-century housing stock. A cracked heat exchanger in a 1960s slab home on Towne Avenue is a carbon monoxide risk, not a “wait until payday” issue. We explain what we find in plain language, put the price in writing, and do the repair the same day when parts allow.
Andre Fuller leads our crews, and the standard he set from day one is simple: no tech picks up a tool until you have seen and approved a written price. Every repair is backed by a written guarantee. If that repair fails inside the coverage window, we return at no charge, automatically. No arguing, no fine print. That is the 365-Day Done Right Promise, and it applies to every job in Pomona.
We are independently owned and operated, part of the Relay Home Co. network, and we have been doing this since 2004. Dispatch and scheduling are coordinated from the brand’s Los Angeles office, with crews serving Pomona locally. When you call at midnight because a furnace quit on a 38-degree night, a real person answers. Not a voicemail tree.
Styles & brands we work with
Furnace Tune Up in Pomona
A Furnace Tune Up in Pomona costs $80 to $200 and is the single best way to avoid a no-heat emergency during a January cold snap. We inspect the heat exchanger for cracks, test the ignitor and flame sensor, check gas pressure, clean the burners, and verify that the blower motor is moving the right amount of air. In older Pomona homes with undersized ductwork, that airflow check often reveals a static pressure problem that a basic tune-up from another company would miss.
What a Tune-Up Catches
We find cracked heat exchangers on original floor furnaces in Pomona more than any other single failure. That is a safety issue, not a comfort issue. We also catch failing ignitors, dirty flame sensors, and blower motors pulling too many amps because the ducts are too restrictive. All of this gets documented in a written report with photos.
When Pomona Homeowners Should Schedule
Book a tune-up before the first cold stretch, typically late October or early November. If your furnace made a smell when you first switched it on this fall, that is usually dust burning off, but a tune-up confirms it is not something worse. Homeowners near Fairplex and the 10 freeway corridor deal with more airborne dust, which means dirty burners and clogged filters happen faster here.
Emergency Furnace Repair in Pomona
Emergency Furnace Repair in Pomona runs $150 to $700 and is available 24 hours a day, 7 days a week. When a furnace dies during a cold winter night and you have kids or elderly family in the house, you need someone who answers the phone and gets a tech on the road. We do that. No overtime surcharge, no “emergency fee” tacked on after the fact. The price is written before work begins.
No-Heat Calls in the Pomona Valley
The most common no-heat call we get in Pomona is a furnace that will not ignite. Older standing-pilot systems often have a thermocouple that finally gives out. Newer electronic-ignition furnaces fail on a dirty flame sensor or a weak ignitor. Both are typically repairable in under two hours if the part is on the truck, and we stock common parts for Carrier, Bryant, Daikin, and American Standard at our metro supply location.
Gas Odor or Suspected CO
If you smell gas, leave the house and call the utility company first from outside. Do not flip light switches. After the utility clears the scene, call us to inspect the furnace. A cracked heat exchanger on an old floor furnace in a Pomona slab home can leak carbon monoxide into living space. We take this seriously and will not restart a furnace we have not cleared as safe.
Trusted Brands We Service in Pomona
We service and repair furnaces from Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. Our techs carry diagnostic tools and common replacement parts for these brands, which keeps most Pomona repairs to a single visit. If you have a Bryant in a 1960s ranch or a newer Daikin in a remodeled home near Phillips Ranch, we can diagnose it accurately. No brand snobbery, no “we only work on what we sell” runaround. We fix what you have.
Common Furnace Repair Problems We See in Pomona Homes
- Original floor furnaces with cracked heat exchangers. These are common in Pomona’s 1940s and 1950s slab-on-grade homes. A crack here leaks carbon monoxide directly into the living space, and the fix is often a full replacement, not a patch.
- Asbestos-wrapped ducting from mid-century retrofits. In neighborhoods like Wilton Heights, many homes had central air retrofitted decades ago using asbestos tape and insulation. Repairing or replacing a furnace connected to this ductwork requires safe containment first.
- Undersized electrical panels that cannot support modern blower motors. A 100-amp panel from the 1960s may not handle the startup draw of a high-efficiency furnace blower. We check the panel before recommending a replacement so you are not surprised by a voltage drop or a tripped breaker.
- Rooms that never warm up because of disconnected or crushed attic ducts. Pomona’s cramped, hot attics are hard on flex duct. We frequently find ducts that have separated, collapsed, or were never properly sized when the system was installed.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Pomona, CA
Furnace repair in Pomona typically costs between $150 and $700. A simple ignitor replacement might land near $180. A blower motor replacement or gas valve repair pushes toward $600 to $700. The final number depends on the part, the furnace brand, and how difficult the access is, which in older Pomona homes with tight attics can be significant. What it does not depend on is our mood, the technician’s commission, or how expensive your house looks. Every job gets a written price upfront. Estimates are free. Call (831) 607-5485 and we will walk you through the likely cost before anyone drives out.
| Service | Typical Cost in Pomona |
|---|---|
| Furnace Tune Up | $80 – $200 |
| Emergency Furnace Repair | $150 – $700 |
We Also Serve Cities Near Pomona
Beyond Pomona proper, our crews take calls in Diamond Bar, La Verne, San Dimas, and Walnut. If you are in one of those communities, you get the same written price guarantee and live arrival tracking. Read more about our Furnace Repair in Pomona coverage area to confirm your neighborhood is within our service zone.
Serving Pomona, CA - Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Pomona
If the heat exchanger is cracked, replacement is the only safe option. A cracked exchanger on a floor furnace in a Pomona slab home leaks carbon monoxide directly into your living space, and this is not repairable. If the exchanger is intact but the gas valve or thermocouple failed, repair is reasonable and usually runs $150 to $400. We will show you photos of the exchanger and give an honest recommendation. Call (831) 607-5485 for an inspection.
Yes, in most cases we can work on the furnace itself without disturbing the asbestos-wrapped ducts, as long as the asbestos is intact and not in the area we need to access. If the ducting is deteriorating or directly blocks the repair, abatement by a licensed asbestos contractor is required before we proceed. We always flag this before any work starts. Call us to assess your specific situation.
Short-cycling in Pomona homes is usually caused by an oversized furnace, a dirty flame sensor, or restricted airflow from undersized ducts. In houses near Ganesha Park and the older tracts off Holt Avenue, we often find the ducts were sized for a smaller system decades ago. We measure static pressure to confirm the airflow problem before changing parts. A written diagnostic costs nothing to discuss at (831) 607-5485.
This is almost always a duct issue. Pomona’s older single-story homes have long duct runs through hot, cramped attics, and rooms farthest from the furnace get the least air. We find disconnected, crushed, or undersized ducts regularly. The fix often involves rebalancing airflow or replacing a section of duct, not a new furnace. Call us for an assessment and a written quote.
Possibly. Many Pomona homes built between 1940 and 1970 have 100-amp or even 60-amp panels. A new high-efficiency furnace with an ECM blower motor can draw more on startup than an old PSC motor, and an undersized panel may trip breakers or drop voltage. We check this during the replacement quote process and will tell you before you commit. Call (831) 607-5485 for a free estimate.
One More Thing About Pomona Furnaces
In Pomona’s Wilton Heights neighborhood, many 1940s and 1960s tract homes still have asbestos-wrapped ducting from mid-century retrofits. Before any furnace repair or replacement touches that ductwork, the asbestos must be safely contained. That is not a concern in newer neighborhoods over in Chino Hills, but it is a real hazard here. A like-for-like furnace swap in one of these homes often disappoints, not because the new furnace is bad, but because the original ducts leak, the floor plan is unbalanced, and the electrical panel is marginal. The real fix is proper sizing, airflow measurement, and sometimes a panel upgrade. That is what we do. Call (831) 607-5485 to talk it through, or book online and track your tech to the door.
Written by Andre Fuller, Owner at Halden Heating and Air West Covina, serving Pomona since 2004.